Mobile Tyre Fitting Today
Open 24/7 07356 062568
A fitter crouched beside a silver car, inflating a tyre from a compressor

Open now · 24 hours, 7 days

Tyre Pressure Sensor Faults Fixed in Lancing

The pressure warning is still lit after you pumped the tyres up. The fitter tests each sensor at your car, replaces the dead one and clears the light.

  • RAC Accredited Repairer
  • On siteHome, work or roadside
  • 24/7Every day of the year
  • 10,000+Tyres in stock
  • 5+ yrsOn the road

Can a faulty tyre pressure sensor be replaced at my home in Lancing?

Yes. Pressures are checked first, then every sensor is read to pin down the one that has failed. Sensors vary between makes, so text your reg in advance and a compatible part comes on the van. Once fitted, it is paired with the car if the system asks for that, and the dashboard light is switched off before the fitter goes. The call gives you a realistic idea of when to expect them.

Why pressure warnings are turning up more in BN15

White Mercedes on a brick driveway with a wheel removed

The light comes on, often on a cold morning, and the question is whether a tyre is low or a sensor has given up. Cold air takes up less room, so a car left out on a frosty street in Mash Barn or Cokeham can show a warning that goes away once the tyres are brought back up to pressure. If it stays on afterwards, or flashes for a while before going solid, something in the system has failed.

More cars locally now carry these systems. Plug-in cars and vans registered in the surrounding neighbourhoods reached 480 by June 2026, up from 181 in the same areas three years before. Pressure monitoring has been fitted to every new car sold since November 2014, so most newer cars on local driveways carry sensors. Electric cars are heavy, and a soft tyre on one wears faster and eats into range.

Plenty of cars run a direct set-up, where a small battery sensor sits inside every wheel, typically combined with the valve. Indirect systems read wheel speed through the ABS and have no sensor to swap. Direct sensors fade as their sealed batteries age, and a sensor or valve stem can crack in a rushed tyre change. On the visit, the fitter reads each one, replaces the failed sensor, codes it to the car when required and resets the system before leaving.

TPMS warning steps for Lancing drivers

  • Check the pressures against the door-shut label or handbook first. A low tyre is the commonest cause of the warning light.
  • If the light appeared just after tyres were fitted elsewhere, mention it, since a sensor may have been damaged or never relearned.
  • If the light keeps coming back every few weeks on a car that is getting on, a sensor battery is the usual suspect.
  • On an electric car, check the pressures before a long run on the A27, as a soft tyre costs range as well as tread.

Electric and plug-in cars in Lancing

  • 480Plug-in cars and vans nearby
  • 343Of which fully electric
  • +165%Plug-in growth since June 2023like-for-like neighbourhoods
  • 10,969Licensed cars nearby
Plug-in share of all vehicles
3.5%

Vehicles: DVLA and DfT licensing statistics, June 2026, for the 14 neighbourhoods within about 1 km of central Lancing.

Close-up of a newly fitted tyre on a silver car

How TPMS sensor replacement works

  1. Step 1: Check the pressures

    Use a gauge on all four tyres. If the warning returns after inflating, suspect a puncture or a sensor fault.

  2. Step 2: Call with your registration

    So we can bring a compatible sensor or valve for your car.

  3. Step 3: Fixed and reset

    The fitter replaces the faulty part, sets the pressures and resets or relearns the system where your car needs it.

Indirect systems use the ABS sensors and usually need a reset rather than parts. Pricing: you get a clear quote on the phone before we set off, with no hidden fees. More about TPMS sensor replacement

Read next

Map and coverage for Lancing · Postcodes: BN15 · Also covering: North Lancing, Sompting · Car parks: work depends on the operator's rules and on the car being parked legally and safely

TPMS Sensor Replacement in Lancing: questions

Still unsure? Call 07356 062568 any time, day or night.

07356 062568

My electric car showed a pressure warning after a frosty night on the drive. Has a sensor died?

Not necessarily. Pressure drops as the air inside cools overnight, so one tyre can slip just under the warning point by morning. Pump all four up to the figure on the door label and take a short drive. If the light refuses to clear, or returns within a day or two, a sensor has probably failed and can be tested where the car is parked.

The tyre pressure light is on and my MOT is due next week. Is that a fail?

For cars first used from 1 January 2012, a monitoring system that is not working counts as a major defect, so yes. A warning that is simply down to a soft tyre is another matter, so check the pressures first. If it stays lit, the failed sensor can be traced, swapped and reset at home before the test.

How do I know if my hybrid has tyre pressure sensors in the wheels?

It depends on the system the maker chose. Cars with a direct system have a sensor inside each wheel, often with a metal valve stem, while indirect systems work through the ABS with nothing in the wheel. The handbook will say, or share the registration when you call and the type can be checked before any part is brought.

TPMS Sensor Replacement in Lancing, day or night

07356 062568

Call or WhatsApp 07356 062568 with your location and registration. We will tell you what we can bring and a realistic arrival time.

Get in touch

Send your details and we will call you back about TPMS sensor replacement in Lancing. For the fastest help, call.

Send an enquiry

Printed on the side of your tyre. Not sure? Leave it blank and we'll check when we arrive.

Stranded right now? Calling is fastest: 07356 062568.

Call nowWhatsApp