
Open now · 24 hours, 7 days
Mitcham TPMS Warning Light and Sensor Fixes
Warning light still glowing after a top-up? The fitter tests each sensor at your home or work in Mitcham and replaces the one that has failed.

- On siteHome, work or roadside
- 24/7Every day of the year
- 10,000+Tyres in stock
- 5+ yrsOn the road
Can a faulty tyre pressure sensor be replaced at my home in Mitcham?
Yes. Pressures are checked first, then a diagnostic tool reads each wheel to show which sensor has gone quiet. Send your registration when you book, because sensors differ between makes and not every type is carried on the van. The new one is fitted and coded to the car where needed, and the system is reset so the dash warning can clear.
Why the warning light comes on in Mitcham

It usually starts on a cold morning: an amber tyre symbol on the dash, and no clue which wheel is to blame. Overnight cold lowers the pressure in every tyre, so a car left out on a CR4 street can start the day just under the warning threshold. Top up all four to the door-pillar figure and drive a few streets. If the light goes out, the system is working. A light that persists, or blinks for a minute before going solid, means a sensor or the system itself is at fault.
Newer cars all carry these sensors, and plug-ins are a growing part of the local fleet. Plug-in cars and vans registered around Mitcham numbered 688 in June 2026, and on a like-for-like basis the local count has grown 147% since June 2023. Many newer cars, electric ones included, rely on direct monitoring, with a sensor fixed inside each wheel and powered by a sealed battery. When that battery runs down after several years, the sensor is replaced rather than recharged, which is why an older plug-in may need one even with perfect tyres.
Sensors also fail through corrosion on the valve stem, especially on cars that spend their winters at the kerb, or when a tyre is levered off without care. The fitter tests every wheel on your drive or in your parking space, whether that is in Figge's Marsh, Ravensbury or elsewhere in Mitcham, swaps the failed sensor and resets the system. Sorting it before the MOT is sensible, as a faulty TPMS is a major MOT defect for cars that first went on the road in 2012 or later.
Before you call about the warning light
- Light on after a frosty night? Pump all four tyres to the door-pillar pressure first, then drive a few streets to see if it clears.
- Check pressures before driving, as tyres warmed by a run along the A236 read higher than they really are.
- Note whether the light is solid or flashing when you start the car, as a flash tends to mean the system has a fault, not that a tyre is low.
- Had tyres changed elsewhere recently? Mention it on the call, as a sensor can be cracked or need relearning after that work.
Electric and plug-in cars in Mitcham
- 688Plug-in cars and vans nearby
- 381Of which fully electric
- +147%Plug-in growth since June 2023like-for-like neighbourhoods
- 6.6%Plug-in share of all vehicles
- Licensed cars nearby
- 8,648
Vehicles: DVLA and DfT licensing statistics, June 2026, for the 17 neighbourhoods within about 1 km of central Mitcham.

How TPMS sensor replacement works
Step 1: Check the pressures
Use a gauge on all four tyres. If the warning returns after inflating, suspect a puncture or a sensor fault.
Step 2: Call with your registration
So we can bring a compatible sensor or valve for your car.
Step 3: Fixed and reset
The fitter replaces the faulty part, sets the pressures and resets or relearns the system where your car needs it.
Indirect systems use the ABS sensors and usually need a reset rather than parts. Pricing: you get a clear quote on the phone before we set off, with no hidden fees. More about TPMS sensor replacement
Read next
More tyre services in Mitcham
TPMS Sensor Replacement nearby
All areasMap and coverage for Mitcham · Postcodes: CR4 · Also covering: Mitcham Junction · Car parks: work depends on the operator's rules and on the car being parked legally and safely
TPMS Sensor Replacement in Mitcham: questions
Still unsure? Call 07356 062568 any time, day or night.
My electric car's tyre warning came on after charging overnight on my Mitcham drive. Is a sensor broken?
Probably not. Plugging in has no effect on the tyres, while a chilly night can pull one of them under the warning threshold by morning. Pump all four to the figure on the door pillar and take a short drive. A light that goes out means the sensors are fine, while one that stays lit may mean a failed sensor, which can be tested at the car.
The pressure light came on after another garage changed my tyres. Can you sort it?
Usually, yes. Some cars need the system reset or the sensors relearned after tyre work, and a sensor can be knocked or cracked during the change. The fitter checks the pressures, tests each sensor and resets the system, replacing a sensor only if one has actually failed. Give the car's make and model on the call.
One tyre keeps losing a little air and the warning keeps coming back. Could it be the sensor valve?
It could. On cars with direct sensors, the valve is part of the sensor, and corrosion where it passes through the wheel can let air seep out slowly. A puncture is the other likely cause, so the fitter checks the tread as well. If the valve is to blame, the sensor or its seal is replaced and the system reset.
TPMS Sensor Replacement in Mitcham, day or night
07356 062568Call or WhatsApp 07356 062568 with your location and registration. We will tell you what we can bring and a realistic arrival time.
Get in touch
Send your details and we will call you back about TPMS sensor replacement in Mitcham. For the fastest help, call.