
Open now · 24 hours, 7 days
Bordon TPMS Warning Light Checks and Sensor Fitting
Pressure warning lit after a frosty start, or straight after new tyres elsewhere? Each wheel is tested at home or work and the failed sensor replaced.

- On siteHome, work or roadside
- 24/7Every day of the year
- 10,000+Tyres in stock
- 5+ yrsOn the road
Can a faulty tyre pressure sensor be replaced at home in Bordon?
Yes. Pressures get checked on all four tyres first, because a soft tyre is the usual trigger, and then a diagnostic tool shows which wheel has gone silent. Send your registration in advance so a compatible sensor rides along, as the van doesn't hold every type. Once fitted, the sensor is programmed if the car requires it and the light is cleared. Expect a fair arrival estimate on the phone.
Why the pressure light comes on in Bordon, and what fixes it

The light tends to appear at the worst moment: a frosty morning, the school run, a car that drove perfectly yesterday. Cold air takes up less space, so pressure that was marginal at bedtime can slip under the warning threshold by morning. If the light clears once the pressures are set correctly, the system did its job. If it stays on, flashes before staying lit, or returns within a day, a sensor or its valve has probably failed and needs testing at the wheel.
More cars in town now rely on a sensor inside each wheel. On the latest licensing figures there are 666 plug-in cars and vans here, up 174% since June 2023 in the same neighbourhoods. Battery cars are heavy and often run low-rolling-resistance tyres, so driving one under-inflated costs range and wears the tread faster. Every new car sold since November 2014 has some form of pressure monitoring, and the sensors on any of them have sealed batteries that eventually run down, while the valve can corrode where it meets the rim.
Not every car needs a part. Indirect systems have no sensors in the wheels at all; they compare ABS wheel speeds, so correcting the pressures and running a reset usually settles them. Direct systems are the ones that need a new sensor fitted inside the wheel and matched to the car before the light will go out. That work happens on a driveway in Shortheath, Hollywater or wherever in Bordon the car is parked, with no trip to a workshop.
Before you book a pressure sensor visit
- After a frosty night, inflate each tyre to the handbook pressure and drive a few miles, as the light often clears without any new part.
- A light that blinks for a while and then glows steadily signals a fault in the system itself, so mention that detail when you ring.
- Keep a note of when the light first appeared and what the weather was doing. It helps separate a cold-air warning from a dead sensor.
- If you drive a heavy plug-in, check the pressures with a gauge each month, as a soft tyre on a heavy car is hard to spot by eye.
Electric and plug-in cars in Bordon
- 666Plug-in cars and vans nearby
- 465Of which fully electric
- +174%Plug-in growth since June 2023like-for-like neighbourhoods
- 11,397Licensed cars nearby
- Plug-in share of all vehicles
- 4.7%
Vehicles: DVLA and DfT licensing statistics, June 2026, for the 11 neighbourhoods within about 1 km of central Bordon.

How TPMS sensor replacement works
Step 1: Check the pressures
Use a gauge on all four tyres. If the warning returns after inflating, suspect a puncture or a sensor fault.
Step 2: Call with your registration
So we can bring a compatible sensor or valve for your car.
Step 3: Fixed and reset
The fitter replaces the faulty part, sets the pressures and resets or relearns the system where your car needs it.
Indirect systems use the ABS sensors and usually need a reset rather than parts. Pricing: you get a clear quote on the phone before we set off, with no hidden fees. More about TPMS sensor replacement
Read next
More tyre services in Bordon
Map and coverage for Bordon · Postcodes: GU35 · Also covering: Lindford, Whitehill, Standford, Oakhanger, Kingsley, Headley, Blackmoor, Passfield, Arford, Headley Down · Car parks: work depends on the operator's rules and on the car being parked legally and safely
TPMS Sensor Replacement in Bordon: questions
Still unsure? Call 07356 062568 any time, day or night.
My 2016 car's pressure light won't go off even after I pumped the tyres up. Will it fail the MOT?
It could. For cars that first took to the road from 1 January 2012, testers treat a pressure monitoring system that has failed or clearly isn't working as a major defect. Since the pressures are already right, a failed sensor or a system fault is the likely cause, and having it fixed before the test date avoids a fail and a retest.
The pressure warning came on a week after a garage changed my tyres. Can you check it at my house in Whitehill?
Yes. Tyre work is a common moment for sensor trouble: a valve can be bent, a seal disturbed, or the relearn some cars need after a tyre change can be skipped. On your drive, each wheel is read in turn to pin down the cause, and the fault is put right with a new part or a reset.
Does an electric car need a special tyre pressure sensor?
Not a special kind, but it has to be the right one for that car. Sensors differ between makers, models and radio frequencies, and many EVs use direct systems with a sensor in every wheel. A sensor that doesn't match won't talk to the car, which is why the correct part is identified before the fitter sets off.
TPMS Sensor Replacement in Bordon, day or night
07356 062568Call or WhatsApp 07356 062568 with your location and registration. We will tell you what we can bring and a realistic arrival time.
Get in touch
Send your details and we will call you back about TPMS sensor replacement in Bordon. For the fastest help, call.